Today we will share with you some tips for fuel saving on Flatbed semi trailers to help you achieve higher fuel economy in daily transportation.
1. Accelerate slowly and avoid impatience
When starting and accelerating, try to use slow acceleration. Compared with sudden acceleration, slow acceleration can save a lot of fuel when reaching the same medium speed. Especially when driving on urban roads, the fuel saving effect brought by slow acceleration is more significant.
2. Choose an economic speed to balance efficiency and fuel consumption
Every vehicle has an economic speed, at which the vehicle has the least wear and tear and the lowest fuel consumption. However, driving at an economic speed for a long time may affect transportation efficiency. Therefore, in actual transportation, it is recommended to drive at a medium speed slightly higher than the economic speed, which can not only ensure transportation efficiency, but also achieve better fuel economy.
3. Light feet and quick hands, control the throttle and shift gears
“Light feet and quick hands” is an important principle of fuel saving. The accelerator should be light and lifted slowly, and the hand shifting should be fast and timely. Lightly pressing the accelerator can avoid the extra fuel supply of the acceleration device and enrichment device in the carburetor, thereby reducing fuel consumption. At the same time, avoid suddenly lifting the accelerator, because this will cause the engine speed to drop suddenly, generate traction resistance, and increase fuel consumption.
4. Use brakes correctly to reduce unnecessary energy consumption
On the premise of ensuring safety, minimize the use of brakes. You can use the “slip instead of brake” method of lifting the accelerator in advance to let the vehicle slow down naturally. This method can not only save fuel, but also reduce the wear of the brake system.
5. Reasonable use of gears to improve engine efficiency
On the same road and at a certain speed, the higher the gear, the greater the engine’s reserve power, the lower the load rate, and the lower the fuel consumption rate. Therefore, if conditions permit, try to use high-speed gears. On the contrary, driving in low gears will increase fuel consumption.
6. Safe gliding and using inertia to save energy
Rational use of gliding is also an effective way to save fuel. When accelerating, decelerating or going downhill, you can glide appropriately, let the engine idle, and put the gear lever in the neutral position. The engine consumes very little fuel when coasting, but you must pay attention to safety and ensure that it does not affect the normal driving of other vehicles.
7. Keep enough distance from the vehicle in front and reduce the frequency of braking
Keeping a sufficient distance from the vehicle in front can reduce the number of frequent braking. This is not only safer, but also effectively saves fuel.